3M

3M™ Maintenance Free Reusable Respirators 4000+ Series are a range of simple and ready-to-use respirators with integrated cartridge and filters. An enhanced valve assembly helps to reduce exhalation breathing resistance, and the close-fitting, non-silicone, textured face seal is soft and non-allergenic. Includes a resealable bag for hygienic storage and transportation.

Get effective, easy-to-use and fully-assembled breathing protection with 3M™ Maintenance Free Reusable Respirators 4000+. A newly enhanced valve assembly helps to reduce exhalation breathing resistance for improved breathing comfort. The 4000+ has a textured face seal that’s soft, non-allergenic and silicone free, and offers protection against a range of gases, vapours and particulate hazards. The lightweight, well-balanced design features a centrally-positioned exhalation valve that helps reduce heat and moisture build up, helping you to stay comfortable in hot and humid conditions. The integrated filters are maintenance free; simply use until your change-out schedule indicates a replacement is needed or when the filters are full, and then discard. An adjustable head cradle helps fit to a broad range of head shapes and sizes, and the neck straps are easy to fasten. The low-profile design won’t hinder your peripheral vision, and the two large, bonded-carbon filters provide low breathing resistance. Available in a choice of four models. Includes a resealable bag for hygienic storage and transportation. *Exhalation breathing resistance of 3M™ 4000+ reduced by >30% for 120 lpm peak exhalation flow and >35 % for 160 lpm compared to 3M™ 4000 Series. Results measured by 3M in 2017 under laboratory conditions. Breathing rates shown as an example only.

4279+ FFABEKP3 R - 01164279

Features 

• Maintenance-free respirator for use with weedkillers or pesticides, cleaning with chemicals, or using solvent based paints
• No maintenance required - ready to use when needed. Use until damaged, particulate filters clog or gas filters become saturated
• Tested and approved to comply with European standards - CE Mark 2797 (EN 405:2001 + A1:2009 FFABEK1P3 R D)
• Compatible with 3M Eyewear and Hearing Protection
• ABEK1 protection against organic and inorganic gases and vapours, acid gases, ammonia and its derivatives
• Enhanced breathability and reduced resistance provided by twin inhalation valves and large bonded carbon filters, compared to single filter masks
• Users must have read all user instructions before use. Misuse may cause injury, severe or life threatening illness
• P3 protection against high level fine dusts and oil or water based mists
• Comfortable breathing due to low resistance exhalation valve

*This product helps protect against certain organic gases and vapours (bp > 65 °C), certain inorganic gases and vapours, certain acid gases and vapours, ammonia and organic ammonia derivatives in concentrations up to 10 x WEL or 1000 ppm (whichever is the lower) and particles in concentrations up to 20 x WEL

4277+ HALF MASK FFABE01P3 R D - 01164277

Features 

• Enhanced valve assembly helps to reduce exhalation breathing resistance for improved breathing comfort
• Soft, close-fitting face seal made with textured, non-allergenic material
• Lightweight, well-balanced design
• Adjustable head cradle and easy to fasten neck straps
• Includes a resealable bag for hygienic storage and transportation
• Integrated filters mean it’s ready to use and maintenance free
• Centrally-positioned exhalation valve helps reduce heat and moisture build-up in hot and humid conditions
• Includes a resealable bag for hygienic storage and transportation

4251+ FFA1P2 R D - 01164251

Features 

• Maintenance-free respirator for spray painting, brush and roller painting, orbital and manual sanding
• A1 protection against organic gases and vapours such as certain solvent based paints, adhesives and cleaning detergents
• Tested and approved to comply with European standards - CE Mark 2797 (EN 405:2001 + A1:2009 FFA1P2 R D)
• No maintenance required - ready to use when needed. Use until damaged, particulate filters clog or gas filters become saturated
• P2 protection against medium level fine dusts and oil or water based mists
• Users must have read all user instructions before use. Misuse may cause injury, severe or life threatening illness
• Compatible with 3M Eyewear and Hearing Protection
• Enhanced breathability and reduced resistance provided by twin inhalation valves and large bonded carbon filters
• Comfortable breathing due to low resistance exhalation valve
• Do not use for isocyanate paints

*This product helps protect against certain organic gases and vapours (bp > 65 °C) in concentrations up to 10 x WEL or 1000 ppm (whichever is the lower) and particles in concentrations up to 10 x WEL

4255+ HALF MASK FFA2P3 R D - 01164255

Features 

• Maintenance-free respirator for spray painting, brush and roller painting, orbital and manual sanding
• No maintenance required - ready to use when needed. Use until damaged, particulate filters clog or gas filters become saturated
• Tested and approved to comply with European standards - CE Mark 2797 (EN 405:2001 + A1:2009 FFA2P3 R D)
• Compatible with 3M Eyewear and Hearing Protection
• A2 protection against organic gases and vapours such as solvent based paint, adhesive and cleaning detergents
• Enhanced breathability and reduced resistance provided by twin inhalation valves and large bonded carbon filters, compared to single filter masks
• Users must have read all user instructions before use. Misuse may cause injury, severe or life threatening illness
• P3 protection against high level fine dusts and oil or water based mists*
• Comfortable breathing due to low resistance exhalation valve

*This product helps protect against certain organic gases and vapours (bp > 65 °C) in concentrations up to 10 x WEL or 5000 ppm (whichever is the lower) and particles in concentrations up to 20 x WEL